Gradall 534C-10 Parts Manual - Manual (Page 142)

HYDRAULIC CIRCUITS
Tilt Cylinder & Tilt Compensating Cylinder
534C-9 Starting Serial No. 0344001
534C-10 Starting Serial No. 0266001
Original Issue 9-94
Revised 3-13-97
9-7
NOTE: TO REPLACE
EXISTING CLAMP
(item 26 with item 35) IN THE
FIELD, IT REQUIRES SOME
MINOR WELDING.
1. Remove existing base plate,
weld channel's 9114-1375 (two
required) to underside of boom
and paint affected area.
2. Install cushion clamp p/n
9020-7464.
3. Adjust outside hoses to
maintain 4" loop dimension.
4. Adjust Tilt & Aux. hoses for
tension.
!
SEE SERVICE NOTE
PCN 950805-KG * Changed part number on item 25.