DiMarzio SDS-1 User Manual
Page 3
*****
DiMARZIO, INC.
1388 Richmond Terrace
Post Office Box 100387
Staten Island, NY 10310
Toll Free Order Desk (outside NYC): 800-221-6468
Customer Service (and NYC orders): 718-981-9286
Technical Assistance (12:00 PM - 5:00 PM ET): 718-816-8112
Fax: 718-720-5296
body. Then tighten the neck back into place. The string height at the
bridge will have to be raised to compensate for the new neck angle.
Unsolder the old pickup (or pickups) you intend to replace with the
SDS-1. Take note of exactly which switch positions the original
pickups were soldered to, so the new pickup will be wired in proper
sequence. You can now mount the SDS-1 on your pickguard, and
solder the connections into the circuit. The white wire goes to the
switch connection, the black wire goes to ground. When all soldering
is completed, remount the pickguard on the guitar. We are sorry to
have to make things so complicated. We think you will agree when
you hear the SDS-1, that the effort is worth it.
Fender, Stratocaster, Strat, Telecaster, Tele, Precision Bass, P-Bass, Jazz Bass
and J-Bass are registered trademarks of Fender Musical Instrument Corp., with
which DiMarzio, Inc. is not affiliated. Les Paul and Les Paul Junior are registered
trademarks of Gibson Guitar Corp., with which DiMarzio, Inc. is not affiliated. Parker
Fly is a registered trademark of Parker Guitars, with which DiMarzio, Inc. is not
affiliated.
Page 3 of 3
D i M a r z i o . c o m
5/6/2004
http://www.dimarzio.com/install/sds_1.html