DiMarzio Super Natural Plus - Manual

DiMarzio Elemental™, Super Natural™ and Virtual
Acoustic™ models
Important: Read all of the following instructions before proceeding. If any
questions or problems arise, you may refer them directly to us.
The Elemental™, Super Natural™ and Virtual Acoustic™ are
designed to work with round-hole, acoustic guitars. They should
install in all guitars with sound hole diameters between 311/16” and
41/8”. Please note: these pickups are magnetic, and will not work with
nylon strings. The magnetic field is shaped to produce a balanced,
even sound with standard bronze string sets. If your guitar has strings
of a different alloy or arrangement (for example, E, B and G strings
unwound), please contact DiMarzio for information on achieving a
correctly-balanced sound.
The Elemental™, Super Natural Plus™ and Virtual Acoustic™ should
be installed with the volume control on the high E side of the sound
hole. The Super Natural™ should be installed with the polepieces
towards the neck. To maintain correct string balance, left-handed
guitars with have the pickup installed in the reverse direction, with the
polepieces towards the bridge.
It is possible to install your pickup while the guitar is in playing
position, but we recommend putting the guitar on a flat, non-
scratching surface so both hands can be used.
1. Slide the pickup under the strings from the high E (treble) side. The
cable will exit from the high E side. You should not have to loosen or
remove the strings, though either of these conditions can make
installation easier. If the strings are up to pitch, you will have to raise
Page 1 of 3 D i M a r z i o . c o m
5/6/2004 http://www.dimarzio.com/install/super_natural.html