Psd single stage pto pump – Hale PSD User Manual
Page 7
Hale Products
Fire Suppression Division
A Unit of IDEX Corp.
700 Spring Mill Avenue
Conshohocken, PA 19428
TEL: 610/825-6300
FAX: 610/825-9615
www.haleproducts.com
Hale Europe Ltd.
Fire Suppression Division
A Unit of IDEX Corp.
Charles Street
Warwick, CV34 5LR England
TEL: (0)1926 623600
FAX: (0)1926 623666
www.haleeurope.com
IDEX CORPORATION
MADE IN THE USA
PSD Single Stage
PTO Pump
Features and Benefits
750 - 1500 GPM (2850 - 5678 LPM) NFPA
performance
Designed for modern diesel engines up to 500 HP
Compact design allows maximum truck design
flexibility
Technical Information
Type:
Single-stage gear-driven centrifugal pump
designed for PTO drive, midship, or rear mount
applications
Impeller:
Fine grain bronze, closed type, single
suction, dynamically balanced with front and rear
removable bronze sealing rings.
Pump Shaft:
Heat treated stainless steel ground to
finish size
Pump Shaft Seal:
Maintenance-free, self-adjusting
mechanical seal
Pump Case:
Fine grain cast iron with a minimum
tensile strength of 30,000 PSIG. Flanged discharge
outlet. Auxiliary discharge opening accommodates
flanged connections up to 3-inch (76 mm). Tested to
600 PSIG at Hale's facilities.
Suction Flange:
6-inch Victaulic (150 mm)
Discharge Flange:
4-inch (100 mm)
Primer Connection:
Customer supplied in
apparatus plumbing
Testing:
Pump dynamometer tested at Hale facility
to ensure compliance with NFPA 1901 performance
standards.
Pump Gearbox:
All ball bearing construction.
Precision cut and crown ground heat treated helical
gears. Splash lubrication system using SAE 30W oil.
Equipped with water-cooled oil pan to reduce
transmission temperatures on 1000 GPM and larger.
Note: Hale Products Inc. cannot assume responsibility for product failure resulting from improper maintenance or
operation. Hale is responsible only to the limits stated in the product warranty. Product specifications contained in this
material are subject to change without notice. Bulletin 965 3/02 ©2002, Hale Products Inc
.
750 - 1500 GPM (2850 - 5678 LPM)
Gear Ratios:
1.40, 1.59, 1.81, 2.0, 2.16, or 2.37
Drive Shaft:
Heat treated, 1-3/4" Keyed input
shaft
Weight:
Standard weight less oil and all options -
280 lbs (127 kg)
Miscellaneous:
Discharge outlet and transmission
are in the vertical position as standard
Optional Equipment
ESP Electric priming system
Relief Valve System
Horizontal or inverted transmission position
All bronze construction
Stainless steel valves