Bissell 7901 - Manual (Page 10)

10
Plan activities to give carpet time to dry.
Remove easily moved furniture from the room (chairs,
lamps, coffee tables, etc).
Vacuum thoroughly to pick up loose debris and pet hair
before using the ProHeat.
Plan your cleaning route to leave an exit path. It is best
to begin cleaning in the corner farthest from your exit.
Set up the machine following instructions in
The Features section, pages 6-9.
Use Fiber Cleansing Formula in the SmartMix tank when
cleaning carpets, stairs or upholstery. Use clean water in
the SmartMix tank for gentle cleaning, rinsing, or when
applying carpet protectant.
Choose the SmartMix setting to match the
cleaning job.
Set the ReadyTools switch to either Tools/PreTreat or
Floor Cleaning.
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet, high traffic
areas such as entryways and hallways, or stairs.
Set the SmartMix dial to High Traffic.
Set ReadyTools dial to PreTreat.
Plug into a proper outlet and turn ON both the Power
and SmartTemp switches.
While pressing the trigger, slowly make several passes
over the area to be cleaned. Caution: Do not overwet.
Turn the machine Power switches OFF and let BISSELL
Deep Cleaning Formula dissolve the tough soil for 1-2
minutes before continuing.
1.
2.
Operations
3.
4.
1.
2.
3.
4.
1.
Machine Preparation
PreTreating
2 4'
1
3
3'
4
5
6
7
9
10
11
12
EXIT
STAR
T
HERE
Tip:
Try pre-treating
stairs or entry
ways with
BISSELL Tough
Stain PreCleaner
™ .
Then deep
clean with the
SmartMix
®
dial set on
High Traffic.
TOUGH STAIN
PRECLEANER
™
Penetrates and Loosens Tough Stains & Embedded Dirt before Deep Cleaning
2.
3.
4.
5.
Before You Clean Carpets