Philips CCB092AT - Manual (Page 43)

2
Press the PLAY/o o button or the STOP/p p button to select
VCR SETUP, then press the F.FWD/B B button.
Blue Background 43
VOL.
CH.
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
TRACKING REC/OTR
SPEED MEMORY
ALT. CH
PAUSE/STILL
MUTE
F.FWD REW
PLAY
STOP
SLEEP/WAKE UP
MENU CLEAR
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON. The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal, set BLUE BACKGROUND to OFF. When you select
a channel that is receiving a weak signal, you will see and hear the
static in the TV programming.
To set BLUE BACKGROUND to ON or OFF, follow the steps
below.
1
Press the MENU button.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PRESS B
VCR SETUP
> ONE TIME PLAY [ON]
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY [ON]
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
> BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/o o button or the STOP/p p button to select
BLUE BACKGROUND. Then, press the F.FWD/B B button
repeatedly so that OFF (or ON) appears beside BLUE BACK-
GROUND.
4
Press the STATUS/EXIT button.
1
4
2-3
• A blue screen may appear briefly
between channel changes if BLUE
BACKGROUND is set to ON. To
avoid seeing the brief blue screen,
set BLUE BACKGROUND to OFF.
Helpful Hint