Philips CCB092AT - Manual (Page 31)

One-Touch Recording 31
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours long
without setting the timer.
Before you begin, make sure:
● Channels are set up.
● There is a tape in the TV/VCR. The record tab must be intact.
1
Use the CH(annel) m m /n n button or the Number buttons to
select the channel you want to record.
4
2
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen. Details are on page 30.
3
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately. The RECORD light will appear.
OTR LENGTH 0:30
CH12
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR
button, then press the STOP/▼ button on the remote con-
trol.
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired recording length appears on
the screen.
• You can not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
• You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 37.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Helpful Hints
Press the STOP/EJECT but-
ton on the TV/VCR to stop
the OTR.
2
3
1
VOL.
CH.
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
TRACKING REC/OTR
SPEED MEMORY
ALT. CH
PAUSE/STILL
MUTE
F.FWD REW
PLAY
STOP
SLEEP/WAKE UP
MENU CLEAR