Philips DA1200-05 - Manual (Page 11)

9 EN
Use FM menu
1
Press MENU to access the menu.
» [Scan setting] (scan settings) is
displayed.
2
Press / repeatedly to select a menu
item.
3
Press OK to confirm the option.
4
Repeat steps 2 and 3 if sub-options are
available.
• [Scan setting] (scan setting)
• [All stations] (all stations): scan all FM
radio stations.
• [Strong stations only] (strong stations
only): scan stations with strong signals
only.
• [Audio setting] (audio setting)
• [Stereo allowed] (stereo allowed):
select stereo broadcast.
• [Forced mono] (forced mono): select
mono broadcast.
• [System] (system)
• [Backlight] (backlight): select [On]
to keep the backlight on, or select a
duration for the backlight.
• [Language] (language): select a
language for displayed menus.
• [Factory Reset] (factory reset): reset
all settings to factory default.
• [Software Upgrade] (software
upgrade): upgrade the software when
available.
• [SW version] (software version):
display the version information of
current software.
Note
•
Before you perform the software upgrade, make sure
that the latest software is available on your PC and the
digital radio is correctly connected to your PC through
the USB cable.
•
If no button is pressed within 15 seconds, the product
exits the menu.
6 Synchronize the
clock
The digital radio can automatically synchronize
its clock with a DAB or RDS radio station that
transmits time signals.
Note
• The time accuracy depends on the DAB or RDS radio
station.