Philips InRange Bluetooth smart leash AEA1000 for iPhone 5-4S & the new iPad - Manual (Page 8)

6 EN
3 Prepare
To fully benefit from the support that Philips
offers, register your product at www.philips.
com/welcome.
Prepare your iPhone 4S/
iPhone 5 or New iPad
1
Enable Bluetooth on your iPhone 4S/
iPhone 5/New iPad.
2
Download and install Philips InRange from
Apple App Store.
InRange
+
Prepare the InRange device
For first-time use:
• Remove the plastic tab from the battery
compartment.
» The InRange device switches on
automatically.
» The power indicator flashes red and
green alternately, and the InRange
device beeps.
Tip
•
To switch off the InRange device, press and hold for
more than 3 seconds until the power indicator turns
off and the InRange device beeps. To switch on it again,
press and hold until the power indicator flashes red
and green and the InRange device beeps.
To replace the battery:
1
Use the supplied metal pin to eject the
battery compartment.
2
Load a CR2016 cell battery with the
correct polarity as indicated.
3
Push to close the battery compartment.
1
2
3