Philips SHB6110-37 - Manual (Page 4)

4
1.3 General maintenance
To avoid damage or malfunction:
• Do not expose the headset to excessive heat.
• Do not drop your headset.
• Do not allow your headset to be submerged
in water.
• Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives.
If cleaning is required use a soft cloth, if
necessary dampened with a minimum amount
of water or diluted mild soap, to clean the
product.
About operating and storage
temperatures
• Do not operate or store in a place where
temperature is below -15ºC (5ºF) or above
55ºC (131ºF) as this may shorten your
battery life.
1.4 Remove the integrated battery
If in your country there is no collection /
recycling system for electronic products you
can protect the environment by removing
and recycling the battery before disposing the
headset. Please take the battery to a battery
collection and recycling location.
Removing the battery will destroy the product.
Make sure the headset is disconnected from the
power adapter before removing the battery.
You can remove the battery by completing the
following steps.
Tear off the ear cushion of the left earshell.
Remove the screws that hold the earshell in
place.
Open the housing.
Cut the battery wires.
Remove the battery.
1. Tear off the
ear-cushion
2. Remove the
screws
3. Open the
housing
4. Remove the
battery
1
4
5
The battery is inside
the left earshell