Philips MCM590-37B - Manual (Page 15)

15
English
Switching on /off
Switching to active mode
● Press CD, TUNER, AUX or
USB PC LINK.
Switching to Eco Power standby mode
●
Press B.
➜
ECO POWER button lights up.
➜
The display screen will go blank.
Switching to standby mode (view
clock)
● Press and hold B.
➜ The clock is displayed.
➜ While in the standby mode, pressing
CLOCK•TIMER will switch the system to the
Eco Power standby mode.
Note:
– Before switching the system to the Eco Power
standby or standby mode, make sure the
demonstration mode has been deactivated.
Demonstration mode
If the demonstration mode is active, whenever
you switch the system to the Eco Power standby
or standby mode, it will begin showing the
various features offered by the system.
To activate the demonstration
● In Eco Power standby/standby mode,
press and hold
Ç on the main unit for 5
seconds until "
DEMO ON" is displayed.
To deactivate the demonstration
●
Press and hold Ç on the main unit for 5
seconds until "
DEMO OFF" is displayed.
Setting the clock
The clock can be set in either 12-hour or
24-hour mode ("
11:59
PM " or "
23:59" for
example).
(00:00 î 12:00AM)
( 00 :00 / 12 :00AM )
( 00: 00 / 12: 00 AM ) 4
3
2
1 5 ,
1
Press and hold CLOCK on the remote until the
time flashing on the display.
OR
Press and hold CLOCK•TIMER on the main
unit until " SELECT CLOCK OR TIMER" is
displayed. Then press ë to change the display
to “
CLOCK” and press CLOCK•TIMER again
to confirm.
2
Press PROGRAM (PROG) repeatedly to
change between 12-hour and 24-hour clock
mode.
3
Press à or á repeatedly to set the hour.
4
Press í or ë repeatedly to set the minute.
5
Press CLOCK (or CLOCK•TIMER) to store
the setting.
➜
The clock will start working.
Notes:
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 90 seconds.
Basic Operations