Philips MCM590-37B - Manual (Page 14)

14
English
Notes:
– When the USB PC Link feature is activated,
Philips Sound Agent 2 will automatically be
launched (if it has been successfully installed under
OS Windows 2000/XP).
– The default setting for PRESET/REVERB is MP3/
Study Room respectively. You may select from the
list of different sound modes to suit your music and
environment preference. Alternatively, you may
select PRESET (Neutral mode) and REVERB (No
Environment mode) for the minimum sound effect.
3
Press à or á to select your favorite playlist,
and then press í or ë until the desired track
in the playlist is highlighted.
4
Press ÉÅ to start playback.
➜ The track information will appear on the
display. The display only supports English
characters
.
During playback,
– Press
SHUFFLE to play all available tracks in
the playlist in random order.
– Press
REPEAT to repeat playback of all the
tracks in the playlist .
5
To exit, select another active mode or
press
Ç.
Philips Sound Agent 2
Philips Sound Agent 2 is a BONUS software
provided with Philips Audio system to enhance
the quality of MP3 Music playback via USB PC
Link.
1
Philips Sound Agent 2 will be automatically
launched if USB PC Link is selected.
2
Press DSC/PRESET or VEC/REVERB to
select different Preset or Reverb sound effect.
3
For more details about using Philips Sound
Agent 2 features on your PC, please refer to
the User Manual in the supplied CD-ROM or
the Help menu.
Notes:
– Philips Sound Agent 2 minimum OS requirement:
Windows 2000 or XP.
– Please refer to the CD-ROM sleeve for detailed
installation procedures, OR ‘Software installation’ in
this manual.
Enabling digital CD audio output
Before playing the CD through your PC’s
CD-ROM drive, it is necessary to configure your
PC’s hardware as follows:
For Windows ME / 2000 / XP
1
Enter the system control panel menu and
select:
“System
™ Hardware ™ Device Manager ™
CD-ROM drives ™ Action-Properties ™
Properties ”.
OR
For Windows 98SE
Enter the system control panel menu and select:
“MULTIMEDIA” and “CD MUSIC”.
2
Check the ‘Enable digital CD audio for this CD-
ROM device’ setting option is selected (enabled).
Notes:
– You may need to refer to your PC’s manual for
correct configuration.
– For the optimal playback effect of the CD/MP3-
CD, please use your Philips audio system.
USB PC Link