Philips MP3 Micro Hi-Fi System - Manual (Page 19)

English
19
Radio Reception
Tuning to radio stations
1
Press SOURCE on the front panel of the
system repeatedly or TUNER on the remote to
select TUNER.
➜ TUNER is displayed briefly.
2
Press SOURCE on the front panel of the
system or TUNER on the remote once or
more to select your waveband (FM/AM).
3
Press and hold ALBUM -/+ а /б (а /б
on the remote).
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning:
SEARCH.
4
Repeat step 3 if necessary until you find the
desired station.
●
To tune to a weak station, press ALBUM -/+
а /б (а /б on the remote) briefly and
repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 40 radio stations in
the memory for each band.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden.
1
Press TITLE -/+ н / л (ALBUM/PRESET
+/- on the remote) to select the preset number
where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROGRAM for more than 2 seconds to
activate programming.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
pg001-027_MCM298_37_Eng 2006.7.3, 14:46 19