Philips MP3 Micro Hi-Fi System - Manual (Page 18)

18
English
CD/MP3-CD Operation
Notes:
CD playback will also stop when;
– the CD door where the disc is playing is opened.
– you select another source: TUNER or AUX.
– you select standby.
– the set auto off time is out.
– no button is pressed within 15 minutes in the
CD PAUSE position.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
SHUF ................ tracks of the entire disc are
played in random order.
REP ALL ........... repeats the entire disc/ program.
REP ................... plays the current track
continuously.
1
To select your play mode, press SHUFFLE or
REPEAT on the remote control before or
during playback until the display shows the
desired function. (SHUF, REP, REP ALL)
2
Press ÉÅ to start playback if in the STOP
position.
➜
If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE / REPEAT modes are no
longer displayed.
● You can also press 9 to cancel your play mode.
Programming track numbers
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
“Loading discs”).
2
Press DISC 1/2/3/4 (CD 1/2/3/4 on the
remote) to select a disc.
3
Press PROGRAM to start programming.
➜
PROG starts flashing.
4
Press TITLE -/+ н / л (н / л on the
remote) repeatedly to select the desired track.
●
For MP3 disc, press ALBUM-/+ а б
(ALBUM/PRESET +/- on the remote) and
TITLE -/+
н / л (н / л on the remote)
to select the desired album and title for
programming.
5
Press PROGRAM to store the track.
6
To end programming, press
9 once.
➜
PROG stays and the programme mode
remains active.
➜
The total number of tracks programmed and
the total playing time are displayed.
➜
For MP3 disc, total playing time will not be
shown.
7
To start program play, press ÉÅ.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If the total playing time is more than "99:59"
then "--:--" is displayed instead of the total playing
time.
– If you attempt to programme more than 40
tracks, "
PROGRAM FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
To review the program
● Stop playback and press TITLE -/+ н / л
( н / л on the remote) repeatedly.
● To exit review mode, press 9.
Erasing the program
●
Press
9 once when playback is stopped or
twice during playback.
➜
PROG disappears and "
PROGRAM CLEARED"
is displayed.
Note:
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
pg001-027_MCM298_37_Eng 2006.7.3, 14:46 18