Philips SACD-DVD Player - Manual (Page 11)

11
Preparation
Basic Connections
● Please refer to the instruction books of your TV,
VCR, Stereo System or other devices as
necessary to make the best connections.
● Make one of the following connections,
depending on the capabilities of your existing
equipment.
The following guidelines are options for the best
picture and sound quality available on your
DVD/SACD player.
Picture
1 Use the CVBS Video Ouput for good picture
quality.
2 Use S-Video Output for the better picture
quality.
3 Use Component Video (Y CbPb CrPr) Output
for best picture quality.
Sound
1 Digital audio connections provide the clearest
sound. Connect the DVD player’s DIGITAL
AUDIO OUT (either COAXIAL or OPTICAL)
to your amplifier or receiver.
2 If digital connections are not possible, connect
the DVD player’s LEFT/RIGHT FRONT,
CENTER, SUBWOOFER, LEFT/RIGHT
SURROUND connectors to the corresponding
inputs on your multi-channel audio/video
receiver.
3 If both the above connections are not possible,
connect the DVD player’s Left and Right (white
and red) AUDIO OUT to your amplifier, receiver,
stereo or TV.
Warning!
– Never make or change connections
with the power switched on.
– Connect the DVD/SACD player directly
to your TV, instead of eg. a VCR, to avoid
distortion because DVD video discs are
copy protected.
– Do not connect the DVD/SACD player
AUDIO OUT to the PHONO IN of your
amplifier or receiver.
Connecting to a TV
● Make one of the following connections,
depending on the capabilities of your existing
equipment.
If your TV has a component video (Pr/Cr
Pb/Cb Y) input connector,
1 Connect the Pr/Cr Pb/Cb Y VIDEO OUT jacks
on the DVD player to the corresponding INPUT
on the TV using an optional Pr/Cr Pb/Cb Y cable.
2 Connect the Left and Right AUDIO OUT jacks
of the DVD player to the AUDIO Left/Right
INPUT on the TV.
Progressive / Interlace SELECTOR
This switch will change the type of signal output
from the Component Video Output on the
player.
Interlace:
Select this setting when connected to a standard
(interlace format) TV.
Progressive:
Select progressive when you have a TV that can
accept progressive signals (480/525p) to enjoy
accurate color reproduction and high quality
images.
FRONT
FRONT
VIDEO OUT
Y Pb/Cb Pr/Cr
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
Progressive
Interlace
Progressive
Interlace