Philips TSU9600-37 - Manual (Page 6)

6
TSU9600 Starter’s Guide
Changing the Pronto Settings
Note Your installer may have blocked access to the Settings pages. Normally, your installer will have
fully programmed your Control Panel and no changes are required.
To open the Settings pages:
• Press and hold the Settings icon for more than 3 seconds.
General
Tip Press and hold the ‘-’ and ‘+’ buttons to increase or decrease the setting faster.
Version and network information as well as
memory status can be found on the Info Page.
General volume
covers all the sounds
you hear when you
operate the Control
Panel. Button volume
applies specifically to
the default sound you
hear when you press
a button.
Turning the Control Panel On/Off
Tip Always switch the Control Panel off during transport to prevent the touch screen from being
activated and draining the battery.
To change Date & Time settings
1 Tap the Month, Day, Year or Time
button.
This highlights the button.
2 Tap the ‘-’ and ‘+’ buttons to
adjust the date or time.
To change the Volume settings
• Tap the ‘-’ and ‘+’ buttons to
adjust the volume settings.
To access the other Settings pages:
• Tap the different tabs.
Power switch
The Power switch on the
bottom of the Control
Panel turns the Control
Panel on and off.