Philips HTD3514-F7 - Manual (Page 19)

17
English
EN
• [Audio Sync]: Set audio delay if audio
and video cannot be matched.
• [Speaker Setup]: Set up speakers for
best surround sound experience.
• [Sound Mode]: Select a predefined
sound mode to suit your video and
music.
• [Treble/Bass]: Set the high frequency
(treble) and low frequency (bass)
settings of the home theater.
• [Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sounds and
increases volume of sounds such as
speech. Applicable to Dolby Digital
encoded DVD discs only.
Parental control settings
Password and Ratings
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [Preferences] and then press OK.
• [Password]: Set or change your
password for parental control access.
If you do not have a password or
have forgotten your password, enter
000000.
• [Parental Control]: Enable maturity-
based restricted access for playback
of DVD-video that are recorded with
ratings. To play discs irrespective of the
rating, select [8 Adult].
Lock disc
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [General] and then press OK.
• [Disc Lock]: Lock the disc to restrict
play. You can lock up to 20 discs on
your home theater.
Note
• To play a locked disc, follow the onscreen instructions
to enter the password, and then press OK.
Display settings
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [Preferences] and then press OK.
• [PBC]: Enable or disable the content
menu navigation of VCD and SVCD
discs with Play Back Control feature.
Energy saving settings
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [General] and then press OK.
• [Display Dim]: Set the brightness of
the home theater front panel display.
• [Sleep Timer]: Switch the home
theater to standby mode after the
elapsed time.
• [Auto Standby]: Switch the home
theater to standby mode after 25
minutes of no activity when in disc or
USB mode.
Restore default settings
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [Preferences] > [Default], and then
press OK.
4
Follow the onscreen message to restore
default setting.
» Your home theater is reset to its
default settings, except for password,
parental control and disc lock settings.