5 change settings, Language settings, Picture and video settings – Philips HTD3514-F7 User Manual
Page 18: Audio settings, Picture and video settings 1, Audio settings 1
16 EN
5 Change settings
The home theater settings are already
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
BACK. To
exit the menu, press (Home).
Language settings
Onscreen display language
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [General] and then press OK.
• [OSD Language]: Select a display
language for menu.
Disc language
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [Preferences] and then press OK.
• [Audio]: Select an audio language for
discs.
• [Subtitle]: Select a subtitle language
for discs.
• [Disc Menu]: Select a menu language
for discs.
Note
•
If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the end of this user manual (see
•
If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
Picture and video settings
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [Video] and then press OK.
• [TV System]: Select a video format
supported by the TV.
• [TV Display]: Select a picture format
to fit the TV screen.
• [Picture Setting]: Select animation for
the slide show.
• [HD JPEG]: Enable this feature to view
high-definition JPEG pictures through
HDMI connection.
• [HDMI Setup]: Access the following
setup through HDMI connection.
* [Resolution]: Select a resolution for
high definition videos.
* [HDMI Deep Color]: Recreate the
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
* [Wide Screen]: Select a display
format for wide screen videos.
* [EasyLink Setup]: Set up EasyLink
control (see 'Set up EasyLink (HDMI-
Note
•
If you change a setting, make sure that the TV supports
the new setting.
Audio settings
1
Press (Home).
2
Select [Setup] and then press OK.
3
Select [Audio] and then press OK.
• [HDMI Audio]: Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.