Philips HTD3514-F7 - Manual (Page 17)

15
English
EN
Button Action
Press to stop the installation
of radio stations.
Press and hold to erase the
preset radio station.
RADIO Manual:
1) In radio mode, press
RADIO. 2) When a radio
frequency blinks, press OK
to store the radio station.
3) Repeat step 1 and 2 to
store other stations.
Automatic:
In radio mode, press and
hold RADIO for three
seconds to reinstall all the
available radio station.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.
1
Press RADIO to switch to radio source.
2
Press .
3
Press and hold (Play) to toggle between
50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your home theater.
• If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
2
Press AUDIO SOURCE repeatedly until
AUDIO IN appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files.
Choose sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Select predefined sound modes to suit your
video or music.
1
Press SOUND repeatedly to select a
sound mode.
• MOVIE: Enjoy a cinematic audio
experience, specially enhanced for movies.
• MUSIC: Recreate the original recording
environment of your music, in the
studio or at a concert.
• ORIGINAL: Experience the original
sound of your movies and music,
without added sound effects.
• NEWS: Hear every word with
optimized speech and clear vocals.
• GAMING: Enjoy thrilling arcade
sounds, ideal for action-packed video
games or loud parties.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR repeatedly to select a
surround mode.
• MULTI-CH: Traditional 5.1 channel for
a more relaxing cinematic experience.
• STEREO: Two-channel stereo sound.
Ideal for listening to music.
Note
• If the audio source is a 2.1 channel. multi-channel mode
will output 5-channel stereo sound.