BUSH High Definition Digital Set Top Box with DAB+ Receiver DFTA52DAB - Manual (Page 22)

21
System Setup & User Preferences of DVB
Factory Default
1. Press the Menu Button to enter the Main Menu and
then select the Setting, System Setup and then
Factory Default .
2. Press the OK Button and enter the correct the PIN code
and press the OK Button again to confirm your selection,
the factory default data will be loaded and begin to reset
your Set Top Box Settings. All setting will be cleared.
NOTE: Factory default PIN is “0000”.
User Preferences
OSD Language
Press the Menu Button to enter the Main Menu and
then select the Setting, User Preferences and then
OSD Language.
Note: Only English is supported for this Set Top Box.
OSD Transparency
1. Press the Menu Button to enter the Main Menu and
then select the Setting, User Preferences and then
OSD Transparency .
2. Press the ▲▼ Buttons to select the OSD Transparency
option and press the OK Button to enter submenu.
3. Press the ▲▼ Buttons to select the transparency value
that you desire (4 transparency modes are available: 30%,
50%, 75% and 100%). Press the OK Button to confirm.
4. Press the EXIT Button to exit all menus or press
the MENU Button to return to the previous menu.
CH Info Bar Time Out
1. Press the Menu Button to enter the Main Menu and
then select the Setting, User Preferences and then
CH Info Bar Time Out .
2. Press the ▲▼ Buttons to select the CH Info Bar Time
Out option and press the OK Button to enter the submenu.
3. Press the ▲▼ Buttons to select the timeout that you
desire (4 timeout modes are available: 1 second, 3 second, 5
second, 10 second) and press the OK Button to confirm.
4. Press the EXIT Button to exit all menus or press
the MENU Button to return to the previous menu.