Philips AZ100717 - Manual (Page 8)

English
9
AZ 1007/14
page
9
CASSETTE RECORDER
SYNCHRO START CD RECORDING
1. Set the source selector to CD.
2. Insert a CD and if desired, programme track numbers.
3. Press STOP•OPEN
9 / to open the cassette holder.
4. Insert a blank tape.
5. Close the cassette holder.
6. Press RECORD
0 to start recording.
™ Playing of the CD programme starts automatically from the
beginning of the programme. It is not necessary to start the
CD player separately.
7. For brief interruptions, press PAUSE
;. To resume recording,
press PAUSE
; again.
8. To stop recording press STOP•OPEN
9 /
To select and record a particular passage within a track
1. During playback, press and hold down the SEARCH button
∞
or
§ to find your passage.
2. Press PLAY•PAUSE
2; to put the CD player on pause at the
selected passage.
™ Recording will begin from this exact point in the track when
you press RECORD
0.
RECORDING FROM THE RADIO
1. Set the source selector to RADIO.
2. Tune to the desired radio station (See RADIO RECEPTION).
3. Press STOP•OPEN
9 / to open the cassette holder and
insert a blank tape.
4. Close the cassette holder.
5. Press RECORD
0 to start recording.
Note: If you are recording an MW (AM) station, adjust the
BEAT CUT switch to eliminate any whistle noises.
6. For brief interruptions, press PAUSE
;. To resume recording,
press PAUSE
; again.
7. To stop recording, press STOP•OPEN
9 /
RECOR
D
PLAY
SEARCH
STOP-OPEN PAUSE
DYNAMIC BASS BOOST
SHUF
POWER POWER
VOLUME VOLUME
DBB DBB DYNAMIC DYNAMIC BASS BOOS T BASS BOOS T
DYNAMIC BASS BOOST
STO P
SEARCH
PLAY•PA
USE
CD MODE
SHUFFLE
POWER
VOLUME
DBB DYNAMIC BASS BOOST
RECOR D
PLAY
SEARCH
STOP-OPEN PAUSE
DYNAMIC BASS BOOST
SHUFFLE
POWER POWER
VOLUME VOLUME
DBB DBB DYNAMIC DYNAMIC BASS BOOS T BASS BOOST
DYNAMIC BASS BOOST
BAND
FM AM
TUNNING
MHz kHz 530
800 1000 1300 1700
92
88
96 100 104 108
• FM • AM
POWER
VOLUME
DBB DYNAMIC BASS BOOST