Philips DC912-37 - Manual (Page 10)

10
English
Preparations
2
Press and hold the PAIR button on the rear of
the subwoofer for three seconds to activate
signal receiving.
➜ The LED indicator on the subwoofer flashes
in blue and green alternatively .
●
If the connection succeeds, the display shows
“PASS”.
●
If the connection fails or the connection cannot
be set up successfully within 60 seconds, the
display shows “FAIL”.
Notes:
– The wireless connection will be disconnected
automatically after power-off.
– See “Basic Functions - Switching the system to
Eco Power Standby mode” for how to switch
between Eco Power Standby mode and standby
mode.
C Antenna Connection
FM Antenna
It is unnecessary to connect the FM pigtail
antenna since it is fixed to the main unit.
●
Adjust the FM antenna for optimal FM stereo
reception.
D Optional connection
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.
Connecting a USB mass storage device
or SD/MMC memory card
By connecting a USB mass storage device or SD/
MMC memory card to the Hi-Fi system, you can
enjoy the device's or card’s stored music through
the powerful speakers of the Hi-Fi system.
● Insert the USB device's USB plug into the
socket on the set.
OR
for the devices with USB cables:
1
Insert one plug of the USB cable (not supplied)
to the
socket on the set.
2
Insert the other plug of the USB cable to the
USB output terminal of the USB device.
OR
for the memory card:
● Fully insert the memory card (metal contact
facing left) into the SD / MMC slot on the top
of the system.
Connecting other equipment to your
system
This feature allows you to listen to music from
the external equipment throught the powrful
speakers of the Hi-Fi system.
● Use an Aux-in cable (supplied) to connect the
AUX IN-1 or AUX-2 jack (3.5mm, located on
the bottom panel) to an AUDIO OUT or
headphone jack on an external device (such as
TV, Laser Disc player, DVD player or CD
recorder).
Note:
– Refer to the operating instructions for the
connected equipment for details.
pg001-026_DC912_37_Eng 8/25/08, 10:33 10