BenQ S660C - Manual (Page 144)

130 Menus
Adjusting the length of a note
The default note length is a quarter note (the screen uses
the number 4 to represent a quarter note). Press
to
increase the note's length (the number on the screen will
increase); press to reduce the note's length (the
number on the screen will decrease). Various note lengths
are represented by the numbers shown in the chart:
Adjusting a note's octave
The default notes just entered are in the middle octave
(represented on the screen by the number 5). Press
to adjust a note's octave. The octave of a note is
represented by the numbers shown in the chart:
Adding a sharp to a note
Press to add a sharp '#', which raises the note a
semitone. To remove a sharp from a note, press .
8
A sharp cannot be added to an E or B note.
On-screen
number
1 2 3 4 5 6 7 8
Note length 1/16 1/8 3/16 1/4 3/8 1/2 3/4 1
On-screen number Represented octave
4 Lower octave
5 Middle octave
6 Higher one octave
7 Higher two octaves