Philips CCC133AT - Manual (Page 35)

POWER
EJECT
SPEED
MEMORY
1 2 3
4 5 6
7 8 9
0
CH. VOL.
SLEEP/
WAKE UP ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
FM
F.ADV
SLOW
MENU STATUS/EXIT CLEAR
Timer Recording (cont’d) 35
6
Repeat steps 1-4 to make sure you cleared the correct
recording.
Checking or Clearing Timer Recordings
1
With the TV/VCR on, press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select
VCR PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
4
Press the F.FWD/B button to display information about the
next timer recording. (If you do not press a button within 10 sec-
onds, information about the next timer recording will appear auto-
matically.) This will continue until all positions have been displayed.
Then, the menu will disappear. You can exit the Program Review at
any time by pressing the STATUS/EXIT button.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
2-4 5
1
• With ShowGuard, you don’t have to
worry about losing your timer
recordings. If the power fails, timer
recordings will be restored when the
clock is reset. (The clock will reset
itself automatically if you are using
AUTO CLOCK. Details are on pages
14-17. If you are not using AUTO
CLOCK, reset the clock manually.
Details are on pages 12-13.) The
timer recording will not occur only if
it was scheduled to take place
during the power failure.
Helpful Hint