beautypg.com

Reset – Philips WAS5-37 User Manual

Page 22

background image

English

22

Reset

Reset

If desired, you can restore your Center or Station
to their default setting (including the network
setting).

When to reset Center or Station:

Resetting Center or Station helps to re-establish
the connection between Center and Station.

To change the way your Center connects to PC,
you need to reset the Center (see the Option
1

, Option 2 or Option 3 in manual Connect

to your PC

)

1

Check the set is switched on (See Basic
functions

)

2

Press and hold STOP • MENU to enter the
MENU

screen (or on the remote control, press

MENU

)

3

Use the navigation controls 3 or 4 and 2
to enter Settings

4

Use the navigation controls 3 or 4 and 2
to enter Restore settings

5

Press 3 or 4 and 2 to select Yes

The set is rebooted. Language selection

screen appears

6

Select your desired language: English, Français,
Español

, Nederlands, Italiano and Deutsch

The set enters Installation Mode

The search for Center or Stations starts. The

Wi-Fi connection is being re-established

If the Center is reset and Stations are
not reset:

On the Stations, enter Installation Mode by:

a. Remove the Station’s power plug and then,

connect it to the power supply again

Connecting to Center” appears

b. Press MENU or STOP to enter the selection
screen of Installation Mode and Select
Server

c. Use the navigation controls 3 or 4 and 2 to

select Installation Mode

If a Station is reset and the Center is not:

On the Center, select HD mode and then, enter
Installation Mode

by:

a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select Add New
Station

Searching for Stations starts

If both Center and Stations are reset:

Do as you did in the first-time Wi-Fi connection
(see the user manual for WACS57 or WACS5:
Installation, Set up Wi-Fi connection
between Center and Station

)

7

On Center, press STOP

Çto exit Installation

Mode

when all your Stations are found

p001-p025_WAS5_Eng_37

2/8/2006, 10:00

22

This manual is related to the following products: