Bosch DHD User Manual
Page 9
Page 7
Figure 7
TABLE 2: INSTALLATION DIMENSIONS FOR DHD WITH BOSCH COOKTOP (in.)
INSTALLATION WITH BOSCH COOKTOPS WHEN SPECIFIED
Table 2 Notes
* Dimension "SB" is the minimum distance from the leading edge of the counter to the leading edge of the cutout.
++Dimension "BT" is the thickness of backsplash that provides 1/4" clearance between vent and backsplash. Any
backsplash with a curved radius where it meets the counter will require additional clearance. Thicker backsplashes
may be used by increasing the counter and cabinet depths.
All dimensions are in inches and are based upon a standard 24" deep base cabinet with 25" countertop.
** NGT and NGP: width in table is at the widest point (center).
Cooktop
CW
CD
OW
OD
SB
BT, Max++
Model No.
Cutout
Cutout
Overall
Overall
Minimum
Backsplash
Width
Depth
Width
Depth
Set Back
Thickness
30” Cooktops: Installed with DHD8005UC
NGT, NGP
28-7/8
22-1/8
30
23-3/4
1-1/2
3/4
NEM, NES
28-3/4
22-1/8
30
23-7/8
2-1/2
3/4
36”Cooktops: Installed with DHD9605UC
NGT, NGP**
34-7/8
22-1/8
36
23-3/4
1-1/2
3/4
NEM, NES
34-3/4
22-1/8
36
23-7/8
2-1/2
3/4
36" : 34 3/8"
30" : 28 3/8"
2 1/4"