Philips VRX360AT99 - Manual (Page 30)

30 Timer Recording
Follow the steps below to program your VCR to record TV pro-
grams while you’re away from home. You can program up to eight
timer recordings. For each one, the VCR will turn itself on,
record, and turn itself off automatically.
If you are using a Cable Box, timer recordings may be pro-
grammed differently. Read pages eight-nine before proceeding.
Before you begin make sure:
● Channels are programmed.
● The clock is set.
● There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
● The VCR light appears on the display panel of the VCR. If it
does not, press the VCR/TV button once.
Complete each step within 60 seconds of completing the
previous step. If you don’t, start again at step 1.
1
Press the VCR button, then the MENU button to bring up
the main menu display.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
2
Press the Number 1 button on the remote control to select
PROGRAM.
TO SELECT PUSH NO. SHOWN
1 ONCE
2 DAILY
3 WEEKLY
4 PROGRAM REVIEW
TO END PUSH EXIT
Daily
Recording
Menu
Screen DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
SELECT PROGRAM NUMBER
TO END PUSH EXIT
3
Select a once, daily or weekly recording.
● Press the Number 1 button to select ONCE. The VCR will
record a TV program on any day you choose, up to 12 months
away.
● Press the Number 2 button to select DAILY. The VCR will
record every day from Monday to Friday – starting at the same
time and for the same length of time.
● Press the Number 3 button to select WEEKLY. The VCR will
record on the same day, at the same time, and for the same
length of time every week (for example, every Tuesday from 2-
3 p.m.).
2
1
3
• If you need to make corrections
while programming a timer record-
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter the
correct information.
• If the end of the tape is reached
during a timer recording, recording
will stop. The VCR will eject the
tape and turn itself off.
Helpful Hints
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100