Philips VRX360AT99 - Manual (Page 14)

1
Press the VCR button, then the MENU button to bring up
the main menu display.
14 Channel Memory (cont’d)
3
2
4
Reviewing Programmed Channels
2
Press the Number 3 button to select TUNER SET UP.
3
Press the Number 5 button to select CH MEMORY REVIEW.
A list of programmed channels will appear on-screen.
● If all the programmed channels don’t fit on the screen, press
the Number 1 button to see the remaining channels. Then
press the Number 2 button to return to the first screen of
channels.
● If you do not press any buttons within 10 seconds, you will
either go to the next screen of channels or you will return to
the previous menu display.
4
Press the STATUS/EXIT button twice to exit.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
TO SELECT PUSH NO. SHOWN
1 TV
2 CABLE TV
ON
3 AUTO PROGRAMMING
4 ADD/DELETE CH
5 CH MEMORY REVIEW
6 TV STEREO ON
7 2ND AUDIO
TO END PUSH EXIT
1
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100