Philips VRX360AT99 - Manual (Page 16)

Daylight-Saving Time Selection
You may program the VCR so its clock will automatically move
forward one hour in April and turn back one hour in October.
Daylight-Saving Time is set to ON prior to shipment from the fac-
tory.
You may turn Daylight-Saving Time ON or OFF by following the
steps below.
1
With the clock set, press the VCR button, then the MENU
button to bring up the main menu display.
2
Press the Number 4 button to select SET CLOCK.
3
Press the Number 2 button so that ON or OFF appears to
the right of DAYLIGHT SVG TIME.
4
Press the STATUS/EXIT button to exit.
16 Daylight-Saving Time Selection
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
SET CLOCK
1 SET CLOCK
2 DAYLIGHT SVG TIME [ON]
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
SET CLOCK
1 SET CLOCK
2 DAYLIGHT SVG TIME [ON]
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
3
2
4
1
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100