Philips docking speaker with Bluetooth® DS3600 for iPod-iPhone-iPad - Manual (Page 9)

9 EN
2
Follow the on-screen instructions to
complete the firmware update.
Note
• Do not disconnect power or undock the iPod/iPhone/
iPad during the updating process.
Charge the iPod/iPhone/iPad
When the docking speaker is connected to
power, the docked iPod/iPhone/iPad begins to
charge automatically.
Sync iPod/iPhone/iPad with PC
Note
•
Make sure that iTunes has been configured properly in
your PC.
1
Insert the iPod/iPhone/iPad in the dock.
2
Press and hold for 2 seconds to switch
the docking speaker to standby mode.
» The LED indicators light off.
3
Connect your docking speaker and PC
with a USB cable.
4
Launch iTunes to synchronize your docking
speaker with PC.
» The docked iPod/iPhone/iPad is
synchronized with PC successfully
through the iTunes.
Note
•
Due to different materials and product techniques,
some USB cables may not work with this device.
Play from Bluetooth devices
Note
•
Before you connect a Bluetooth device to this docking
speaker, familiarize yourself with the Bluetooth
capabilities of the device.
• Keep this docking speaker away from other electronic
devices that may cause interference.
• Any obstacle between the speaker and the device can
reduce the operational range.
1
Press to select Bluetooth source.
» The blue Bluetooth indicator flashes
slowly.