Philips docking speaker with Bluetooth® DS3600 for iPod-iPhone-iPad - Manual (Page 10)

10 EN
2
Turn on Bluetooth function on your device.
• Different devices may have different
way to activate Bluetooth.
3
Scan Bluetooth devices that can pair with
your device.
4
When “PHILIPS DS3600” is displayed on
your device, select it to start connection.
» Double beep tone confirmation can be
heard and the Bluetooth indicator light
up stably if connection is successful.
5
Play music in your device.
» Music comes through the docking
speaker.
Tip
• If your Bluetooth device has been paired with DS3600
before, you just need to find out “PHILIPS DS3600” on
your Bluetooth menu, then confirm the connection.
To disconnect Bluetooth:
• Press on the docking speaker again, or
• Deactivate Bluetooth function on
your device or move it beyond the
communication range.
Play from an external audio
device
1
If no iPod/iPhone/iPad is docked, connect
an MP3 link cable (3.5mm, not supplied) to:
• the MP3-LINK socket at the back of
the docking speaker.
• the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
2
Play music on the device (see the device's
user manual).
Tip
•
You can select MP3 link source by pressing on the
remote control.
Adjust volume
To adjust volume:
• Press +/- on your docking speaker; or
• Adjust the volume control of your iPod/
iPhone/iPad, Bluetooth device, or other
external device.
Mute sound
During play, press to mute or unmute sound.