Philips PR1912B - Manual (Page 2)

ANT.IN ANT.IN
OR
ANT.IN ANT.IN
OR
UHF
VHF
300 Ω
75-300
Ω ADAPTOR
H
OOKING
U
P
Y
OUR
TV (A
NTENNA
/C
ABLE
C
ONNECTIONS
)
A combination antenna
receives normal broadcast
channels (VHF 2-13 and UHF
14-69). Your connection is easy
since there is only one 75
Ω
(ohm) antenna jack on the
back of your TV - and that’s
where the antenna goes.
A NTENNA
C OMBINATION UHF/VHF To set the
TV to select only
the channel num-
bers in your area,
see First Time Setup
on page 4.
S MART
H ELP
If your antenna has
a round connector (75
Ω
),
then you're ready to connect it
to the TV.
If your antenna has flat
twin-lead wire (300
Ω
), you
first need to attach the antenna
wires to the screws on a 300
to 75
Ω
adaptor.
Push the round end of
the adaptor (or cable) onto
the ANT(enna) IN jack on
the back of the TV. If the
round end of the adaptor or
cable is threaded, screw it
down tight.
Y ou may have two separate
antennas. One antenna is
for VHF channels (2-13) and
the other antenna is for UHF
channels (14-69).
For homes with separate
UHF/VHF antennas, you will
need an optional combiner
before you can connect the
antennas to the TV.
S EPARATE UHF/VHF
300 to 75
Ω
Adaptor
Combination
VHF/UHF
Antenna
(Outdoor or
Indoor)
Twin-lead
Wire
Round Cable
75
Ω Back of TV
Back of TV
U/V Combiner
75-300
Ω
Adaptor
Outdoor UHF Antenna
(Twin-lead 300 Ω )
Outdoor VHF
Antenna
(Twin-lead 300
Ω
)
Twin-lead
Wire
Push the round end of the
combiner onto the ANT(enna)
IN jack on the back of the TV.
Attach the separate
UHF and VHF antennas to
the correct screws on the
combiner.
Round
End
Outdoor VHF
Antenna
(Round cable 75
Ω
)
- 2 -
To order
any optional
accessory, contact
your dealer or call
1-800-851-8885.
• UHF/VHF
Combiner:
4835 466 97016
• 75-300
Ω
Adaptor:
M61009
• 300-75
Ω
Adaptor:
4835 218 27003
S MART
H ELP