Philips BDP2285-F7 - Manual (Page 18)

8 EN
2 Change settings
This section helps you to change the settings of
this player.
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press . To exit the
menu, press .
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
• [TV display]: Select a picture display format
to fit the TV screen.
• [HDMI video]: Select an HDMI video
resolution.
• [HDMI Deep Color]: Display colors with
more shades and hues when the video
content is recorded in Deep Color and the
TV supports this feature.
• [Picture settings]: Select a predefined
color setting.
Watch 3D video
1
3
2
3
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
• [Closed Caption]: Turn on or off the
display of sound effects in subtitles
(applicable only when a disc and a TV
support this feature).
Note
• If you change a setting, make sure that the TV supports
the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
• [Night Mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
• [HDMI Audio]: Set an HDMI audio format
when this player is connected through
HDMI.
• [Digital Audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(coaxial).
• [PCM Downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
• For settings related to HDMI, the TV must be
connected through HDMI.
• Night mode is only available for Dolby encoded DVD
and Blu-ray discs.