Belkin N Wireless Modem Router PM01527ea F5D8636-4 - Manual (Page 35)

33
N Wireless Modem Router
sections table of contents 1 2 3 4 6 7 8 9 10 5
alTeRNaTe seTUP MeTHod
setting your Connection Type to dynamic/fixed IP (1483 bridged)
This connection method bridges your network and ISP’s network
together . The Router can obtain an IP address automatically from your
ISP’s DHCP server or accept a fixed IP address assigned by your ISP .
6 . VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here . (Assigned by your ISP) .
7 . encapsulation – Select your encapsulation type (supplied by
your ISP) tospecify how to handle multiple protocols at the ATM
transport layer .
VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows
only one protocol running per virtual circuit with fewer overheads .
llC: PPPoA Logical Link Control allows multiple protocols running
over one virtual circuit (more overhead) .
8 . MTU – Enter the MUT value for your ISP .
9 . disconnect after of x minutes of no activity – Checking the box
and enter the number of minute that you want the modem router to
auto disconnect after no activity . After this time has been exceeded,
the connection will be terminated .
Click “Apply Changes” to save and activate your settings . To go back
to the original settings before saving, click “Clear Changes” . Or click
any of the Quick-Navigation links for other options . Your new settings
will not be saved unless your click “Apply Changes” .