Philips TV-VCR 19 in 4 HD VCR - Manual (Page 7)

Hooking Up the TV/VCR (cont’d) 7
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885. (This antenna will fit the CCB134 only.)
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin
Straight Pin
Bent pin
Plug Cable
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes or
view tapes from a camcorder.
Details are on page 32.
2
Plug in the TV/VCR’s power cord.
3
Before you turn on the TV/VCR, go to page eight.
D.
EARPHONE AUDIO VIDEO STOP REW PLAY F.FWD CHANNEL VOLUME POWER REC OTR EJECT
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO
ANT.
VIDEO AUDIO
AUDIO/VIDEO In
Jacks on front of
TV/VCR
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO In Jack
on the front of the TV/VCR.
Use a Video cable to connect the VIDEO OUT Jack on
the VCR to the VIDEO In Jack on the front of the
CCB134