Philips TV-VCR 19 in 4 HD VCR - Manual (Page 58)

58 SmartPicture/FM Radio
SmartPicture
The SmartPicture feature allows you to improve the TV/VCR’s pic-
ture when viewing sports, a movie, or video games; to improve the
picture when the antenna/cable signal is weak; or to reset the pic-
ture controls to their original settings.
1
Press the COMBI button, then press the SMART PICTURE
button repeatedly until the SmartPicture mode you want
appears on the screen. Your selection will remain on the screen
for about 10 seconds, then disappear.The following options will be
available.
SPORTS Use to watch a sports program.
MOVIE Use to watch a movie.
WEAK SIGNAL Use when the picture is weak.
VIDEO GAMES Use when playing a video game.
TV RESET
Use to reset the picture controls to
their original settings.
VAR.SLOW
CABLE/DBS COMBI
VOL.
FM SURF 0
TRACKING F.ADV SLOW
MUTE
VCR PLUS+
/ENTER
PICTURE
SKIP
SEARCH
INDEX
SEARCH SOUND
SMART 1
1
Press the FM button to select FM mode. The radio frequency
appears on the TV/VCR screen, moving around the screen every few
seconds.
2
Press the CH(annel) m/n button until your desired radio
frequency appears.
FM Radio
• To exit FM mode and return to TV mode, press the FM button.
• If you turn off the TV/VCR in FM mode, the TV/VCR will be in TV mode when you turn on the TV/VCR again.
• You may get better FM reception by repositioning the TV/VCR.
• The TV/VCR’s FM radio has a built-in antenna with a band range of 88.0 ~ 108.0MHz.
• You cannot record the FM radio station.
• You cannot switch to FM mode during tape playback, although tape playback is allowed while in FM mode.
• You must be in TV mode in order to select Line Input mode (A/V IN).
• If you receive a weak radio signal, you may go to TV mode and switch between the internal (INT) and external
(EXT) antennas. When you select the external antenna, make sure your antenna or cable is connected to the
ANT(enna) Jack on the TV/VCR. Details are on page six.
1) Press the FM button to return to TV mode if necessary.
2) Press the COMBI button, then press the MENU button.
3) Press the PLAY/▲ button or the STOP/▼ button to select FM ANTENNA.
4) Press the REW(ind)/{ button or the F.FWD/B button to select INT or EXT.
5) Press the STATUS/EXIT button.
Helpful Hints
Follow the steps below to listen to FM radio stations.
FM 88.0MHz
CABLE/DBS COMBI
VOL.
CH.
FM
3
6
9
SURF 0
2
5
8
1
4
7
STATUS/EXIT
STOP
PLAY
F.FWD REW
MENU CLEAR
1
2