Philips TV-VCR 19 in 4 HD VCR - Manual (Page 53)

VAR.SLOW
CABLE/DBS COMBI
VOL.
CH.
FM
3
6
9
SURF 0
2
5
8
1
4
7
TRACKING F.ADV
SLEEP/WAKE UP
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
SLOW
MUTE
VCR PLUS+
/ENTER
PICTURE
SKIP
SEARCH
INDEX
SEARCH SOUND
EJECT
MENU CLEAR
PAUSE/STILL
SMART
Wake Up Timer 53
The Wake Up Timer turns on the TV/VCR automatically at a speci-
fied time within the next 24 hours. You may set the TV/VCR to turn
on at a TV channel (the channel at which the TV/VCR was set last)
or with VCR playback. To set the Wake Up Timer, follow the steps
below. Before you begin:
● Make sure the clock is set. If the clock has never been set,
CLOCK MUST BE SET will appear on the screen at step 2. Then
the SET CLOCK menu will appear.
● Make sure a tape is in the TV/VCR if you want the TV/VCR to
start tape playback at the specified time.
● Make sure no timer recordings are set for the time at which you
want the TV/VCR power to come on.
1
Press the COMBI button, then press the SLEEP/WAKE UP
button.
1
5
• To cancel the Wake Up Timer, fol-
low step 1 above. At step 2, press
the REW(ind)/s
s button or the
F.FWD/B B button to select OFF at
WAKE UP. Press the STATUS/EXIT
button.
Helpful Hint
2
Press the PLAY/o o button or the STOP/p p button to select
WAKE UP. Then, press the REW(ind)/s s button or the
F.FWD/B B button to select TV ON or VCR ON.
4
Press the STATUS/EXIT button.
5
Press the POWER button to turn off the TV/VCR. The
TV/VCR will turn itself on at the specified time.
2-3
4
TO ADJUST PRESS { / B
–TIMER–
> SLEEP
WAKE UP
ON-TIME
OFF
TO ADJUST PRESS { / B
–TIMER–
SLEEP
> WAKE UP
ON-TIME
TV ON
3
Press the PLAY/o o button or the STOP/p p button to select
ON-TIME. Then, press the REW(ind)/s s button or the
F.FWD/B B button to select your desired wake up time. Each
press of the F.FWD/B B button or the REW(ind)/s s button will
increase (or decrease) the time by 10 minutes.
TO ADJUST PRESS { / B
–TIMER–
SLEEP
WAKE UP
> ON-TIME 12:00 AM