Philips HD8964-47 - Manual (Page 83)

81 ENGLISH 81
Machine actions Causes Solutions
The coff ee is too weak (see
note). This might occur when the machine
is automatically adjusting the dose. Brew a few coff ees as described in chap-
ter “Saeco Adapting System”.
The ground coff ee is too coarse. Change coff ee blend or adjust the grind
as explained in the “Adjusting the Ceramic
Coff ee Grinder” chapter.
Coff ee is brewed slowly (see
note). The ground coff ee is too fi ne. Change coff ee blend or adjust the grind
as explained in the “Adjusting the Ceramic
Coff ee Grinder” chapter.
Circuits clogged. Perform a descaling cycle.
The brew group is dirty. Clean the brew group (see the “Weekly
Cleaning of the Brew Group” chapter).
Coff ee leaks out of the
dispensing spout. The dispensing spout is clogged or
not correctly inserted. Clean the dispensing spout and its holes
and insert it back correctly.
Note:
these problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until
the machine performs a self-adjusting operation as described in the “Saeco
Adapting System” chapter.