Philips HD8964-47 - Manual (Page 24)

22 ENGLISH
WATER
HARDNESS
ENABLE FILTER
ACTIVATE FILTER
ACTIVATE FILTER
Replacing the “INTENZA+” Water Filter
When the “INTENZA+” water fi lter needs to be replaced with a new one, the
following icon is displayed.
1 Replace the fi lter as described in the previous chapter.
2 The machine is now programmed to manage a new fi lter.
Note:
If the fi lter is already installed and you want to remove, but not replace it,
select the “ENABLE FILTER” option and set it on OFF.
If there is no “INTENZA+” water fi lter installed, insert the small white fi lter
previously removed into the water tank.
18 The machine starts dispensing water. This screen will be displayed.
ACTIVATE FILTER
PLACE A CONTAINER
UNDER THE
WATER SPOUT
17 Press “ ” to confi rm.
19 When the machine stops dispensing, remove and empty the container.
Now the machine is ready to brew.
In this way the machine has been programmed to inform the user of
the need to replace the “INTENZA+” water fi lter.