Philips HD8964-47 - Manual (Page 15)

13 ENGLISH 13
HEATING UP…
3 The machine is in warm-up phase.
Automatic Rinse/Cleaning Cycle
When warm-up is complete, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1 Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
RINSING
2 The following display is shown. Wait for the cycle to fi nish automati-
cally.
Note:
To stop dispensing, press the “ ” button.
3 When the above steps are complete, the machine shows this display.
You can now perform the manual rinse cycle.