Philips DVDR3475-37 - Manual (Page 29)

29 EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
29 EN
4
Use [K / L] or [the Number buttons]
to enter the start and end time, then
press [B].
Timer Programming
1/1
MON JAN/01 11:00AM
Date Start End E1/E2
New Program Date
JAN/02
E1/E2
E1
Mode
SP
SP 2 : 00
Start
12 : 00AM
End
- - : - -
5 Use [K / L] to select the appropriate
external input position (E1/E2) to
which your external tuner is
connected, then press [B]. Then
select the desired channel to record
on the external tuner.
Timer Programming
1/1
MON JAN/01 11:00AM
Date Start End E1/E2
New Program Date
JAN/02
E1/E2
E1
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
6
Use [K / L] to select a recording
mode.
Timer Programming
1/1
MON JAN/01 11:00AM
Date Start End E1/E2
New Program Date
JAN/02
E1/E2
E1
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
Refer to “Recording Mode” on page 24.
• You can check the remaining recordable space
of the disc when you select the recording mode.
Date
JAN/02
E1/E2
E1
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
7
Press [OK] when all items are
entered.
After displaying a warning message for a few
seconds, timer program list will appear.
Press STANDBY-ON to Timer Standby mode.
Timer Programming
1/1
MON JAN/01 11:00AM SP (1:00)
JAN/ 2/07 12:00 AM E1 SP
Date Start End E1/E2
JAN/02 12:00AM 1:00AM E1
New Program
Your program setting is now stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 30.
8
Press [STANDBY-ON y y ] to set a timer
programming.
• Press [STOP C] to stop recording.
TIMER RECORDING
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
1/1
New Program Date
JAN/02
E1/E2
E1
Mode
Auto
Auto 0 : 00
Start
12 : 00AM
End
1 : 00AM
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
E7E4AUD.indd 29 E7E4AUD.indd 29 2007/05/16 14:56:24 2007/05/16 14:56:24