Philips BDP9000-37E - Manual (Page 51)

EN
8
3 Press the mode selector until the TV light comes on.
4 Find the first code for the TV in the TV code list (refer to ’Codes’ on page 16).
5 Press-and-hold the 1 and 3.
6 When the TV light flashes two times, release the 1 and 3.
7 Enter the code from step 4.
8 Make sure that you can operate the TV with the universal remote control. Refer to
’Overview’ on page 5 for an overview of the functions of the keys and the buttons.
Search automatically for the correct code
1 Turn the TV on with its own remote control or the controls on the TV.
2 Go to the first TV channel.
3 Press the mode selector until the TV light comes on.
After the first and second digits, the TV light flashes one time. After the third digit,
the TV light goes off and flashes two times.
If the device does not react correctly to the universal remote control:
1
Find the next code in the code list.
2 Go back to step 5.
OR:
1
Search automatically for the correct code.