Philips Micro Hi-Fi System MCM195 MP3 - Manual (Page 19)

19
English
Clock/Timer
Activating and deactivating
TIMER
●
In standby or during playback, press
TIMER once.
➜
Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
● Press SLEEP on the remote
control once or more.
➜
Display shows
SLEEP and
one of the sleep time options in
sequence:
60, 45, 30,15, 0, 60...
if you have selected a time.
● To deactivate, press STANDBY ON on the
system or remote control.
➜ SLEEP disappears from the display.
Setting the clock
1
In standby, press CLOCK SET.
➜ The clock digits for the hours flash.
2
Press TUNING 4 ¢ to set the hours.
3
Press CLOCK SET again.
➜ The clock digits for the minutes flash.
4
Press TUNING 4 ¢ to set the minutes.
5
Press CLOCK SET to confirm the time.
Note:
– The backlight for clock display is off in standby.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
1
In standby or active mode, press TIMER for
more than 2 seconds.
2
Press TUNING 4 ¢ to select sound
source.
3
Press TIMER to confirm your desired mode.
➜ The clock digits for the hours flash.
4
Press TUNING 4 ¢ to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
DISPLAY/BAND
SLEEP TIME
PG 001-022_MCM195_37-Eng 2005.5.20, 5:00 PM 19