beautypg.com

Cd/mp3 operation, Playing an mp3 disc 1, Loading a disc – Philips Micro Hi-Fi System MCM195 MP3 User Manual

Page 14: Basic playback controls

background image

14

English

CD/MP3 Operation

The current track number and elapsed

playing time of the track are displayed during
disc playback.

To select a different track

Press

TUNING

4 ¢ (on the remote

control

4 ¢) once or repeatedly until the

desired track number appears in the display.

To find a passage within a track

1

Press and hold down on

TUNING

4 ¢

(on the remote control

4 ¢).

The disc is played at high speed and low

volume.

2

When you recognise the passage you want,

release

TUNING

4 ¢ (on the remote

control

4 ¢).

Normal playback continues.

To interrupt playback

Press

PLAY/PAUSE 2; (on the remote

control 2;) during playback.

The display freezes and the elapsed playing

time flashes when playback is interrupted.

To resume, press 2; again.

To stop playback

Press

9.

Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE or TUNER.
– you select standby.
– you press the tape deck PLAY

2 key.

Playing an MP3 disc

1

Load an MP3 disc.

The disc reading time may exceed 10

seconds due to the large number of songs
compiled into one disc.

"

XXX YY" is displayed. XXX is the current

track number and

YY is the current album

number.

2

Press 4 3 to select a desired album.

IMPORTANT:
The lens of the CD player should never be
touched.

X

Loading a disc

This CD player plays Audio Discs including CD-
Recordables, CD-Rewritables and MP3 CD.

CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.

1

Select

CD source.

2

Press

OPEN•CLOSE3 on

the top of the system to open
the CD compartment.

OPEN is displayed when you

open the CD compartment.

3

Insert a disc with the printed side facing up and

press down on

OPEN•CLOSE3 to close the

CD door.

READ is displayed as the CD player scans the

contents of a disc, and then the total number of
tracks and playing time (or the total number of
albums and tracks for MP3 disc) are shown.

Basic playback controls

To play a disc

Press

PLAY/PAUSE 2; (on the remote

control 2;) to star t playback.

DISPLAY/BAND

PG 001-022_MCM195_37-Eng

2005.5.20, 5:00 PM

14

This manual is related to the following products: