beautypg.com

Radio reception, Tuning to radio stations 1, Programming radio stations – Philips Micro Hi-Fi System MCM195 MP3 User Manual

Page 16: Tuning to preset radio stations

background image

16

English

Radio Reception

Tuning to radio stations

1

Select

TUNER source.

2

Press

DISPLAY/BAND on the set repeatedly

or press

TUNER on the remote repeatedly

until the desired waveband (FM or AM) is
displayed.

3

Press down on

TUNING

4 ¢ and release

button.

The radio automatically tunes to a station

with sufficient reception. Display indication during
automatic tuning:

Srch.

4

Repeat step

3 if necessary until you find the

desired station.

To tune to a weak station, press

TUNING

4

¢ briefly and repeatedly until you have found
optimal reception.

Programming radio stations

You can store up to a total of 20 radio stations (
10 for FM and 10 for AM respectively) in the
memory.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memor y already.

1

Press

ALBUM/PRESET 4 3 to select the

preset number where programming should start.

Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.

2

Press

PROGRAM for more than 2 seconds to

activate programming.

AUTO is displayed and available stations are

programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.

Manual programming

1

Tune to your desired station (see Tuning to radio
stations).

2

Press

PROGRAM to activate programming.

PROG

flashes in the display.

3

Press

ALBUM/PRESET 4 3 to allocate a

number from 1 to 10 to this station.

4

Press

PROGRAM again to confirm the setting.

PROG

disappears, the preset number and the

frequency of the preset station are shown.

5

Repeat the above four steps to store other
stations.

You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

Press

ALBUM/PRESET 4 3 until the desired

preset station is displayed.

DISPLAY/BAND

PG 001-022_MCM195_37-Eng

2005.5.20, 5:00 PM

16

This manual is related to the following products: