Philips DVDR3400-37B - Manual (Page 35)

English
35
Timer Recording
Timer recording (VCR Plus+ ®
System)
This is a simple timer programming
system. To use it, enter the PlusCode
programming number associated with
your television program. You can fi nd
this number in your TV listings magazine.
All the information required by this
recorder for programming is contained in
the programming number.
A
Turn on the TV to the correct viewing
channel for the recorder (e.g. ‘EXT’, ‘0’,
‘AV’.)
B
Press VCR Plus+ on the remote
control.
The VCR Plus+ ® System menu
appears.
VCR Plus+ System
OK CANCEL CONFIRM
Enter the PlusCode programming
number for the show wish to record.
C
Use the numeric keypad 0-9 to enter
the PlusCode programming number for
the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in ‘53124’.)
To clear the PlusCode programming
number, press CLEAR on the remote
control.
To cancel the PlusCode programming,
use ST keys to select
CANCEL
in the
menu and press OK.
About timer recording
Use the timer recording to automatically
start and stop a recording at a later
date/time. The recorder will tune to the
right program channel and begin
recording at the specifi ed time.
With this recorder, you can schedule up
to 20 recordings at a time. During
timer recording, changing the channel
that is being recorded is not possible.
There are two ways to program a
timer recording
– Using the VCR Plus+ ® system.
– Using manual timer schedule.
SOURCE
SELECT TOOLS
DISC MENU
USB TV/DVD
CLEAR REPEAT
ç
PLAY/PAUSE
REC MODE REC MODE TIMER TIMER EDIT EDIT VCR Plus+ VCR Plus+
OPEN/CLOSE
TIMER
TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on
another player, fi nalize the disc. See “Playing your recordings on other DVD players(DVD±R only)”.