beautypg.com

List of settings, 31 en – Philips BDP7200-F7E User Manual

Page 31

background image

31

EN

C

onnec

tions

Pla
yback

F

unc

tion S

etup

O

thers

In

tr

oduc

tion

Basic S

etup

LIST OF SETTINGS

Category

Menus

Options/Sub-Menus

Description

A

d

v

anc

ed S

e

tup

Video
Output

Noise Reduction

Not available for
BD-video.

Off

Reduces the noise of the
playback picture.
“Off”:
Deactivates the Noise Reduction.
“MPEG NR”:
Reduces the block noise seen
characteristically in the MPEG files.
“3D NR”:
Reduces the rough background
noise so that you can feel the
greater feeling of depth.
“Combo ( 3D + MPEG )”:
Activates both “MPEG NR” and
“3D NR”.

MPEG NR
3D NR
Combo (3D + MPEG)

Audio

Night Mode

On

Compresses the range between
soft and loud sounds.

Off

Down Sampling

On

Sets the sampling rate for
outputting the PCM audio from
the digital output (coaxial/
optical).
“On”:
Over 96kHz PCM audio will be
down sampled at 48kHz.
“Off”:
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to
96 kHz are output as LPCM signals.

Off

Virtual Surround

On

Select “On” to enjoy the
stereophonic virtual space
through your existing 2 channel
stereo system during playback of
BD-video or DVD-video.

Off

Blu-ray Disc Audio

Mix Audio Output

“Mix Audio Output”:
The audio for the secondary
video and the interactive
application will be output
together with the audio for the
primary video.
“Primary Audio Only”:
Only the audio for the primary
video will be output.
When playing back a BD-video
which only contains the primary
audio, the audio output will be the
same as case of “Primary Audio
Only” even if the “Blu-ray Disc
Audio” is set to “Mix Audio Output”.

Primary Audio Only

HDMI Audio

This feature is
available only when
the display device
is connected by an
HDMI cable.
Refer to page 35 for
more information.

HDMI Normal

Sets the audio format for the
sound output from the HDMI
OUT.

PCM
Off

Digital Out

When HDMI cable
is connected, make
sure “HDMI Audio”
setting is set to
“Off” to change
the “Digital Out”
setting.
Refer to page 36 for
more information.

Bitstream

Sets the audio format for the
sound output from the DIGITAL
OUT (COAXIAL / OPTICAL).

PCM

E5H11UD-BDP7200_EN_v2.indd 31

E5H11UD-BDP7200_EN_v2.indd 31

2008/09/18 13:55:30

2008/09/18 13:55:30

This manual is related to the following products: