Philips HTS9800W-37B - Manual (Page 12)

12
English
Remote control
(continued)
Using the remote control
A Open the battery compartment.
B Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
C Close the cover.
D Point the remote control directly at the
remote sensor (IR) on the front panel of
the DVD system.
E Select the source you want to control by
pressing the SOURCE button on the
remote control.
F Select the desired function (for example
., >.)
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc..)
– Batteries contain chemical
substances, so they should be
disposed of properly.