BT 1000 - Manual (Page 31)

27
To reset your Synergy Handset to its original
settings
• Press the ➔ button. Display shows
SET UP.
• Press the ✔ button. Display shows
HANDSET.
• Press the ✔ button. Display shows
KEYTONES.
• Press the ➔ button until the display shows
RESET.
• Press the ✔ button. Display shows
CONFIRM.
• Press the ✔ button again. Display shows
CONFIRM
again.
• Press the ✔ button. Display shows
REG. The handset
will be de-registered from the base station(s).
This will reset:
RINGER VOLUME is set to high
RINGER MELODY is set to A
EARPIECE VOLUME set to medium
KEYTONES is set to ON
BACKLIGHT is set to ON
Quickdial memory to shared.
It will delete:
Quickdial numbers stored in the personal memory
Last number redial memory.
Personal Emergency numbers.
Unchanged:
Quickdial numbers stored in the shared memory.
You will now need to re-register your handset. Follow the
instructions on page 9.