BT 1000 - Manual (Page 14)

• Enter the four digit base station code
(default =
0000). Enter this if the base station code
has not been changed.) The
———— marks disappear
one by one.
• Press the ✔ button. You hear a confirmation beep.
Display flashes
LABEL = (this refers to the number
of the handset).
• Press the ✔ button to automatically allocate the next
handset number. Display briefly shows
PLS WAIT then
the base station to which your handset is registered,
e.g.
BASE 1, and finally shows the handset number you
have given it, e.g.
HSET 2.
To de-register a handset
• Press the ➔ button until the display shows
SET UP.
• Press the ✔ button. Display shows
HANDSET.
• Press the ✔ button. Display shows
KEYTONES.
• Press the ➔ button until the display shows
REG.
• Press the ✔ button. Display shows
ADD.
• Press the ➔ button until the display shows
REMOVE.
• Press the ✔ button. Display shows
PIN = ————.
• Enter the four digit base station code (default
0000).
Enter this if the base station code has not been
changed.) The
———— marks disappear one by one.
• Press the ✔ button. Display shows
LABEL = X
(i.e. your handset number).
• Press the ✔ button. You will hear a beep, the display
will show e.g.
HSET 2 followed by REG.
• Your handset is now de-registration.
10
If you are experiencing problems, please call the Synergy
Helpline on 0845 650 20 20.
Park No. is a unique number given to each individual base
station.